Sedikit Info Seputar
[Guide] Beginners Guide On Using SP Flash Tool
Terbaru 2017
- Hay gaes kali ini team Sniffing Blog, kali ini akan membahas artikel dengan judul [Guide] Beginners Guide On Using SP Flash Tool, kami selaku Team Sniffing Blog telah mempersiapkan artikel ini untuk sobat sobat yang menyukai Sniffing Blog. semoga isi postingan tentang
Artikel backup and restore mtk,
Artikel flash rom using sp flash tool,
Artikel how to use sp flash tool,
Artikel vcom drivers for mtk, yang saya posting kali ini dapat dipahami dengan mudah serta memberi manfa'at bagi kalian semua, walaupun tidak sempurna setidaknya artikel kami memberi sedikit informasi kepada kalian semua. ok langsung simak aja sob
Judul:
Berbagi Info Seputar
[Guide] Beginners Guide On Using SP Flash Tool
Terbaru
link: [Guide] Beginners Guide On Using SP Flash Tool
Berbagi Artikel Tentang [Guide] Beginners Guide On Using SP Flash Tool Terbaru dan Terlengkap 2017
Today I am going to show you how to use SP Flash tool. There are many users who do not know how to use SP Flash Tool even though it is a really easy tool to use.
This is going to be a very short and easy guide. Using this guide you will be able to flash any firmware in your MTK device.
Disclaimer : Always check that the firmware is made for your device, if you flash firmware which is not made for your device you will Hard Brick your device.
This guide shall not be re-shared or re-posted anywhere else.
Things You Need :
1. Proper Device Drivers : Download
2. Proper MTK VCOM Drivers Installed
3. A PC
4. SP Flash Tool : Download
- Download And Install The Universal Device Drivers From The Things You Need Section
- Find and Install The VCOM Drivers
- Download SP Flash Tool
- Download The Firmware you need to flash (SP Flash Tool Firmware, Not a Recoevery Flashable ZIP)
- Unzip SP Flash Tool
- Unzip the SP Flash Tool ZIP
- Run SP Flash Tool as an Administrator
- Load the scatter File
- After You have Loaded the scatter file. Turn off your phone.
- Unplug the USB from the device
- Click on download in SP Flash Tool
- Without Turning ON your phone connect it to your PC
- Let the Process begin and wait till there is a Green Circle Saying Process Completed
- Now Remove the battery again and place it in
- Turn ON your phone
Whola You have successfully flashed a firmware using SP Flash Tool.
